Anyware Services™

Go To Shop

All yours for only EUR 4.69
per month

Customize Anyware to match YOUR need
with ready-to-use, pre-configured
automated routines in the app

Preventive Burglar Light

This Scene will automatically start to turn your light ON and OFF randomly when you are not at home in the pre-set time interval to make your home look occupied

Light Schedule

This Scene turns light ON and OFF at a specified light level and in a pre-set time interval every day for the Smart Adaptors you have selected

Indoor Climate Monitoring

This Scene constantly monitors your temperature and humidity level, and will notify you when a sensor is triggered according to the pre-set thresholds

Frost and Temperature Alert

This Scene constantly monitors your temperature level, and will notify you when a sensor is triggered according to the pre-set thresholds. It helps you take action if the temperature changes in your remote holiday cottage - e.g. if there is a risk of frost or the maintenance heat is suddenly dropping 

Sound Alert

This Scene will notify you if nooise is detected above a pre-set sound level (dB) and send you a Sound Alert in the app

Intrusion Detection

This Scene will notify you if sound is detected above a pre-set sound level (dB), and the light will flash for 5 minutes to attract attention from neighbours and stress an intruder. You can only stop the flashing by tapping STOP in the received Intrusion Alert or manually deactivating the Scene in the app

Presence Light

This Scene will detect activity in the room based on the sound detection, and turn the light ON or OFF according to your settings. After midnight it will only turn ON light at 30% if you prefer it

Wake-up Light

The Scene wakes you in the morning with smooth light dimming according to your settings. Select the Smart Adaptors you want to use with this functionality, and adapt the configuration to suit your preferences

Welcome Light

This Scene turns light ON when you arrive home based on geofencing. You can determine which Smart Adaptors and at what light level they should turn in the app 

Energy Saving Mode

This Scene will turn light OFF in all connected Smart Adaptors until manually turned back ON. Other Scenes will override this Scene if light is needed

Smoke Alarm Monitoring

COMING SOON: Value-adding when it's best: This Scene is designed to remotely monitor your smoke alarm and will send a Fire Alert on the mobile phone to you and to others you have registered in the app, if the smoke alarm goes off. It will also remind you to test if your smoke alarm is functional

Care Monitoring

COMING SOON: This Scene is designed for the informal next-of-kin caregiver to remotely monitor the well-being of the older parent living alone. The Scene will detect anomalies in the elderly's activity and mobility patterns and send a Care Alert on the mobile phone to the next-of-kin if action is required

New Scenes and Features

With the Anyware Services™ subscription you get access to new Scenes with Change4Free™, new features and software upgrades 

Works With Google Home

Anyware works with Google Home/Assistant, which allows you to control your light bulbs across brands - i.e. you can turn on/off light in both Anyware Smart Adaptors and for example Philips Hue or IKEA Trådfri with one command

Works With Amazon Alexa

Anyware works with Amazon Alexa, which allows you to control your light bulbs across brands - i.e. you can turn on/off light in both Anyware Smart Adaptors and for example Philips Hue or IKEA Trådfri with one command

Change4Free™

Change4Free™ is a feature in the app that gives you unlimited access to all the automated routines (Scenes), and the possibility of swapping your existing Scenes with new ones as often as you want. This allows you to try new Scenes and customize your app to match your need

Historical Sensor Data (Graphs)

Visualize 1 week or 1 month of historical sensor measurements in the graphs subject to the subscription plan you choose

Check out the Anyware webshop
for great bundled deals including Smart Adaptors

Take Me There


Already got your Smart Adaptors? No worries, you can upgrade to the Anyware Services™ subscription in the app

Your Anyware Services Subscription

gives you unlimited access to all the Anyware Services

In-app Subscription Upgrade
12 Months Plan

In-app Subscription Upgrade: Pay only EUR 4.69 per month for this 12 months subscription, totaling EUR 56.28 for a full year.

It will automatically renew after 12 months unless you cancel it before.

In-app Subscription Upgrade
6 Months Plan

In-app Subscription Upgrade: Pay only EUR 5.99 per month for this 6 months subscription, totaling EUR 35.94.

It will automatically renew after 6 months unless you cancel it before.

 

With the Anyware Services™ subscription, you will get

Access to all the ready-to-use ‘Scenes’ (automated routines) in the app

1 Week of historical sensor data in the graphs of the temperature, humidity and noise level in your home

Change4Free™ feature that allows you to replace your existing Scenes with new ones as often as you want

 

Preventive Burglar Light Scene

Light Schedule Scene

Indoor Climate Monitoring Scene

1 Week Sensor Data in the graphs

How many Smart Adaptors can I have in one subscription?

As many as you want! The Anyware Services subscription applies to your User Account and 'Location' (e.g. 'Home' or 'Holiday Cottage'), and the Smart Adaptors connect directly to your WiFi network router, so there are no limiting gateway.

If you are managing several properties, please contact us on sales@consumer.anyware.solutions for details about our PRO plans.

 

Will the Smart Adaptors work without subscription?

Yes, you can choose to skip the account activation and subscription in the app.

In the Anyware webshop you can also buy the 2-pack Starter Kit, which comes with a compelling basic functionality without subscription (2 Scenes, awesome light dimming and real-time sensor measurements in the app) - and you can always add the Anyware Services™ subscription in the app later if you change your mind.

You can get a preview of the Anyware Services™ subscription in the app if you enter the Product Code '1DAYFREE', which gives you 1 day to try out the PREMIUM and full functionality of the Anyware solution.

Designed in Denmark

Anyware Solutions ApS
Asgårdsvej 148
4100 Ringsted
Denmark

support@anyware.solutions

Download The App

Anyware Home App can be downloaded from Google Play and App Store

Terms & Conditions

B2C (Consumer)
B2B (Partner)

Follow us

Stay tuned - And don't hesitate to Like and Share

Dansk Design

Anyware Solutions ApS
Preben Kaas' Vænge 6
2000 Frederiksberg
Danmark

support@consumer.anyware.solutions

Download App'en

Anyware Home App kan downloades fra Google Play og App Store

Vilkår og Betingelser

B2C (Forbruger)
B2B (Partner)

Følg Os

Og tøv ikke med at 'Like' og 'Dele'
Shopping cart
There are no products in the cart!
0
×
Buy now
Menu

Warning: Use of undefined constant ICL_LANGUAGE_CODE - assumed 'ICL_LANGUAGE_CODE' (this will throw an Error in a future version of PHP) in /home/customer/www/consumer.anyware.solutions/public_html/wp-content/themes/anyware-child/page.php on line 44