Getting started

Set up your Anyware Smart Adaptor™ in just a few simple steps

What you need

Make sure you have these things ready

LED Light Bulb

Use Small Socket Type (E14 or E12/Candelabra)

We recommend to use a dimmable LED light bulb

Smart Adaptor

Your First Anyware Smart Adaptor™

Lamp

Ideally, use a lamp that you can keep mains powered - for example a floor or table lamp

  • Download the Anyware Home App

    Sign up as 'New User'
    Remember to verify your email before you log in

     

  • Install the Anyware Smart Adaptor

    • Remove the light bulb from the lamp where you want to use the Anyware Smart Adaptor
      Remove the light bulb from the lamp where you want to use the Anyware Smart Adaptor
    • Fit the E14/E12 LED light bulb (only LED) into the Anyware Smart Adaptor
      Fit the E14/E12 LED light bulb (only LED) into the Anyware Smart Adaptor
    • Fit the Anyware Smart Adaptor™ with light bulb into the lamp socket
      Fit the Anyware Smart Adaptor with light bulb into the lamp socket
    • Connect the Anyware Smart Adaptor to the internet

      • 1. Turn ON WiFi, Bluetooth and GPS before you start
        1. Turn ON WiFi, Bluetooth and GPS before you start
      • 2. Tap ‘Add Smart Adaptor’ in the Dashboard to start pairing
        2. Tap ‘Add Smart Adaptor’ in the Dashboard to start pairing
      • 3. Select ‘Anyware Smart Adaptor'
        3. Select ‘Anyware Smart Adaptor’
      • 4. Name the Smart Adaptor
        4. Name the Smart Adaptor You can add it to a ‘Room’ later in the Anyware Home App
      • 5. Name your Location
        5. Name your Location If the GPS positioning is not precise, you can type your address manually
      • 6. Connect to your 2.4 GHz WiFi router
        6. Connect to your 2.4 GHz WiFi router Tap the WiFi icon, if your WiFi network does not show
      • 7. Your smartphone is now pairing with the Smart Adaptor using Bluetooth
        7. Your smartphone is now pairing with the Smart Adaptor using Bluetooth
      • 8. Then it connects your Smart Adaptor to your WiFi network
        8. Then it connects your Smart Adaptor to your WiFi network
      • 9. That's it! You are now ready to use the app
        9. That's it! You are now ready to use the app
      • You can now see the Smart Adaptor in the Adaptor Dashboard
        You can now see the Smart Adaptor in the Adaptor Dashboard Tap the bulb icon to turn light ON/OFF Drag the slider to dim the light Tap the middle of the Smart Adaptor to go 1 layer deeper into the sensor graphs

      Start Enjoying Smarter Living

      Designed in Denmark

      Anyware Solutions ApS
      Asgårdsvej 148
      4100 Ringsted
      Denmark

      Download The App

      Anyware Home App can be downloaded from Google Play and App Store

      Terms & Conditions

      Follow us

      Stay tuned - And don't hesitate to Like and Share

      Dansk Design

      Anyware Solutions ApS
      Preben Kaas' Vænge 6
      2000 Frederiksberg
      Danmark

      Download App'en

      Anyware Home App kan downloades fra Google Play og App Store

      Vilkår og Betingelser

      Følg Os

      Og tøv ikke med at 'Like' og 'Dele'
      Shopping cart
      There are no products in the cart!
      0
      ×
      Buy now
      Menu

      Warning: Use of undefined constant ICL_LANGUAGE_CODE - assumed 'ICL_LANGUAGE_CODE' (this will throw an Error in a future version of PHP) in /home/customer/www/consumer.anyware.solutions/public_html/wp-content/themes/anyware-child/page.php on line 44